AEROBARRIER PROCESS: SIT BACK AND WATCH THE ENVELOPE GET TIGHTER

In a simple and cohesive 5-step process, Aerobarrier turns your home into a properly sealed enclosure, protecting you from air leakage and therefore reducing your utility bills.  Learn more about Aerobarrier by exploring the simple process.

SETUP

Equipment is set up at the job site. Conveniently transported by trailer, AeroBarrier install equipment is mobile and portable. The equipment includes a compressor, generator, blower door, emitters, hoses, and the AeroBarrier machine.

PREP

Prep the area by covering any openings that won’t be sealed. This includes taping or covering any designed openings or finished horizontal surfaces within the space. Emitters are then set up throughout the area to be sealed.

The equipment is then set up. This includes blower door,
emitters, hoses, and the AeroBarrier machine.

4 Corners AeroBarriers 22 of 41

PRESSURIZE

Using a blower door, the space is pressurized. After that, a computer controls the entire process including controlling the temperature, pressure, humidity, and distribution of sealant within the space during the process.

SEAL & MONITOR

With the AeroBarrier process you see results in real time. You have complete control over your desired level of air tightness and can achieve any level of tightness required. Watch as the envelope gets tighter!

4 Corners AeroBarriers 15 of 41

CERTIFY

Run a final blower door test to verify the sealing results. At the end of the process, receive an AeroBarrier Certificate, with a pre and post leakage report.

CONTACT 4 CORNERS AEROBARRIER & INSULATION

Whether you’re a builder, architect, engineer, or homeowner, fill out the contact form to get in touch with 4 Corners Aerobarrier & Insulation.

CONTACT 4 CORNERS AEROBARRIER & INSULATION

Whether you’re a builder, architect, engineer, or homeowner, fill out the contact form to get in touch with 4 Corners Aerobarrier & Insulation.